Good config/settings?

All about waroverlay
Numsebacon
Posts: 3
Joined: 04 Jun 2020, 18:53
Contact:

Good config/settings?

Post by Numsebacon » 04 Jun 2020, 18:54

Anyone got some good settings for planes and tanks? :)
564sd6f54esf5
Posts: 204
Joined: 05 May 2019, 09:01
Contact:

Re: Good config/settings?

Post by 564sd6f54esf5 » 05 Jun 2020, 01:59

Pasting from another thread.

set Aim Acceleration Delay to 20% (the default 50% is too slow).

If you are playing planes with really good aileron and elevator response like early Bf109, Spitfire, A6M2,3,5 or Swedish J2A-1 then set Aim Acceleration Delay to 0 %, aimbot sensitivity to 500% and wreck havoc in Air RB.

Do not use aimbot in Tank RB for shooting moving target. It looks very obvious in replay that you are cheating. Default settings are good for tank RB.
getthereamazinglyfast
LH44
Posts: 32
Joined: 25 Mar 2020, 18:31
Contact:

Re: Good config/settings?

Post by LH44 » 05 Jun 2020, 10:01

564sd6f54esf5 wrote:
05 Jun 2020, 01:59
Pasting from another thread.

set Aim Acceleration Delay to 20% (the default 50% is too slow).

If you are playing planes with really good aileron and elevator response like early Bf109, Spitfire, A6M2,3,5 or Swedish J2A-1 then set Aim Acceleration Delay to 0 %, aimbot sensitivity to 500% and wreck havoc in Air RB.

Do not use aimbot in Tank RB for shooting moving target. It looks very obvious in replay that you are cheating. Default settings are good for tank RB.
Where do i find the "aim accerlation" part?
NemoSeaFury
Posts: 4
Joined: 27 May 2020, 15:41
Contact:

Re: Good config/settings?

Post by NemoSeaFury » 05 Jun 2020, 12:34

I too would like to know where aim acceleration is all i see is sensitivity and inversion rates
Inokichi
Posts: 4
Joined: 30 May 2020, 12:22
Contact:

Re: Good config/settings?

Post by Inokichi » 05 Jun 2020, 14:23

¿?
modder
Posts: 2
Joined: 05 Jun 2020, 15:16
Contact:

Re: Good config/settings?

Post by modder » 05 Jun 2020, 15:21

how long for EAC to be unlocked? been using since early 2019 but took a break
LH44
Posts: 32
Joined: 25 Mar 2020, 18:31
Contact:

Re: Good config/settings?

Post by LH44 » 05 Jun 2020, 17:01

modder wrote:
05 Jun 2020, 15:21
how long for EAC to be unlocked? been using since early 2019 but took a break
U need a level 3 account but as long ur account is made in 2019 then ur good. Just keep buying subscription
LH44
Posts: 32
Joined: 25 Mar 2020, 18:31
Contact:

Re: Good config/settings?

Post by LH44 » 05 Jun 2020, 17:19

NemoSeaFury wrote:
05 Jun 2020, 12:34
I too would like to know where aim acceleration is all i see is sensitivity and inversion rates
ive just found out, its in the game not in hack menu. go on war thunder on go to "controls" and type in search bar "aim" and you will find "aim acceleration delay" that set to 50% if u hadent changed already and just to 0%
564sd6f54esf5
Posts: 204
Joined: 05 May 2019, 09:01
Contact:

Re: Good config/settings?

Post by 564sd6f54esf5 » 05 Jun 2020, 18:08

LH44 wrote:
05 Jun 2020, 17:19
NemoSeaFury wrote:
05 Jun 2020, 12:34
I too would like to know where aim acceleration is all i see is sensitivity and inversion rates
ive just found out, its in the game not in hack menu. go on war thunder on go to "controls" and type in search bar "aim" and you will find "aim acceleration delay" that set to 50% if u hadent changed already and just to 0%
Yes it's game setting.
Aim Acceleration delay smooth-outs the erratic cursor movement for fine tuning the aim. But it causes lag when used with aimbot, so keep it at 0 when using aimbot. However I would suggest you play around with it.

If you are flying a plane with low ammo count or a sluggish plane, then I would suggest not using aimbot at all, set aim Acceleration delay to 20% and aim manually with help of lead indicator.

Keep playing and you will figure out what works for which plane.
getthereamazinglyfast
Inokichi
Posts: 4
Joined: 30 May 2020, 12:22
Contact:

Re: Good config/settings?

Post by Inokichi » 06 Jun 2020, 07:20

Great thanks for info
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest